Slow delivery and expensive price for what these are.Also, be forewarned these are very difficult to change on the Ryobi saw.You have to disassemble most of the saw, then put the band around the small motor spindle, partially on the large blade spindle and then laboriously turn the assembly while simultaneously slowly forcing the belt to turn further onto the spindles.Ensure you force the first belt ALL the way to the back of the spindles BEFORE you start the same routine with the second belt.
Then the REALLY hard part is getting the screws at the center of the front spindle housing back into the thrust washer which has to be moved around with a small very thin scvreww driver while you try to see the holes appear through the 4mm screw holes with a flashlight.Definitely a two man operation as is much of this project.
Disassembly and reassembly time was around 12 hours for the non-experienced.Becareful not to lose any of the roughly 30 different sized screws in the process.
Real recommendation--don't buy the Ryobi 10 inch table saw unless you are willing to pay half the purchase price to have a pro replace the bands when they go (and they will!).
Click Here to see more reviews about: V BELT BT3000 RYOBI - RIDGID 662329001
Product Description:
V BELT BT3000 RYOBI - RIDGID 662329001
Buy cheap V BELT BT3000 RYOBI - RIDGID 662329001 now Get 22% OFF
0 comments:
Post a Comment