I bought this 1/2"4 foot long belt from another vendor.I was getting some very annoying vibrations on my Delta contractor's saw. After about 15 minutes of loose measuring and removing about 5 inches from the Power Link belt, and then installing it, my Delta has never run better or smoother.My other belt, which only had a few hours on it, is in the trash bin.The 4 foot length should probably fit most any contractor's saw that has the motor out the back of the saw, like the Delta.This Power Link belt is very easy to work with and has simple, clear instructions.You remove your old belt, measure the Power Link belt against the old one and remove links if necessary. With the contractor saws, you seem to have quite a bit of latitude on the length. Mine ended up being slightly shorter than the standard belt that it replaced. Then you splice the belt together, which is very easily done, by inserting tabs into slots. I used a pair of needle nose pliers to work with the tabs. Install the belt on the saw, noting the arrows for proper rotation direction and you're done. Works like a champ.I'll be putting these belts on all of my belt driven tools.
It's a quick and easy fix to annoying vibrations.
Click Here to see more reviews about: Grizzly H9815 Power Twist® V-Belt, 1/2" x 4' (T21992)
Product Description:
Perfect for lathes, table saws, bandsaws and other woodworking tools. Smooth running with less vibration than solid belts. Power Twist® V-Belts can be customized in minutes to any size - just add or remove sections to fit your needs. Carry a Power Twist® V-Belt in your vehicle for a fix anywhere solution to broken fan belts.
Buy cheap Grizzly H9815 Power Twist® V-Belt, 1/2" x 4' (T21992) now
0 comments:
Post a Comment